December 13, 2022
The quality of the power supply of the Internet data center directly affects the operation of IT equipment, so it is very important to monitor the power inlet and outlet lines of the top cabinet of the Internet data center.
With the reduction of available energy and the increase of energy cost, how to use energy more economically and effectively is the responsibility of relevant enterprises.
A general contracting company in Thailand purchased AC AMC16 series Power Meter from our company, which fulfilled the testing requirements of AC Multi-Circuit in the Internet data center.
The multi-channel monitoring instrument for power consumption of Internet data centers is mainly used in the monitoring of electrical parameters of multiple power distribution outlet circuits.
It centrally measures, displays, and communicates the busbar voltage in the loop, the current, power, and electric energy of multiple outgoing loops, and the switching status of each loop.
Realize the centralized measurement and monitoring of the power distribution outlet circuit with relatively simple monitoring requirements.
Incoming Line| Function | Description |
| Measurement
(Common) |
Three-phase AC kWh, kVarh, Active Power, Reactive Power, Current, Voltage, Power Factor, Apparent Power, Frequency, Zero ground voltage, neutral line current |
| Measurement
(Power Quality) |
total harmonic content (THD), 2-63 harmonics, current, and voltage unbalance degree, current K coefficient (KF), voltage crest coefficient (CF), telephone waveform factor (THFF), peak voltage, voltage, and current sequence quantity |
| Temp.&Humidity
Monitoring |
Temperature Monitoring Range: -40℃～+99℃
Humidity Monitoring Range: 20%～90% |
| Leakage Current | 2-channel Leakage Current Measurement |
| Accuracy | Electrical Parameter Metering Accuracy: Voltage/current level 0.2, active power/electric energy level 0.5, reactive power/electric energy level 1
Temperature Metering Accuracy: ±1℃; Temperature Metering Accuracy: ±5% |
| Communication | RS485 Interface (MODBUS-RTU protocol) |
| DO
(Switch Output) |
2-channel DO (Digital Output); 3A 250VAC/3A 30VDC |
| DI
(Switch Input) |
6-channel DI (Digital Input); dry contact |
Outgoing Line| Function | Description |
| Measurement
(Common) |
Three-phase AC kWh, kVarh, Active Power, Reactive Power, Current, Voltage, Power Factor, Apparent Power, Frequency, Zero ground voltage, neutral line current |
| Measurement
(Power Quality) |
total harmonic content (THD), 2-63 harmonics, current, and voltage unbalance degree, current K coefficient (KF), voltage crest coefficient (CF), telephone waveform factor (THFF), peak voltage, voltage, and current sequence quantity |
| Temp.&Humidity
Monitoring |
Temperature Monitoring Range: -40℃～+99℃
Humidity Monitoring Range: 20%～90% |
| Leakage Current | 2-channel Leakage Current Measurement |
| Accuracy | Electrical Parameter Metering Accuracy: Voltage/current level 0.2, active power/electric energy level 0.5, reactive power/electric energy level 1
Temperature Metering Accuracy: ±1℃; Temperature Metering Accuracy: ±5% |
| Communication | RS485 Interface (MODBUS-RTU protocol) |
| DO
(Switch Output) |
2-channel DO (Digital Output); 3A 250VAC/3A 30VDC |
| DI
(Switch Input) |
6-channel DI (Digital Input); dry contact |
Kindly Fill out the Form below and tell us more about your Requirements,
We would like to provide Suitable Solution for You.
or Send us Email directly, [email protected]
2014/35/EU
2014/30/EU
Standard Lead Time:
Sample: 2 days
Bulk: 1 month
2014/30/EU
2014/32/EU
2014/35/EU
IEC62052-11, IEC62053-22
EN61010-1, EN61000-3
2014/30/EU
2014/32/EU
2014/35/EU
IEC62052-11, IEC62053-22
EN61010-1, EN61000-3
CE-RED, IEC, LVD, EMC
2014/30/EU
EN IEC 61000
IEC 62052
IEC 62053
IEC 61558-1
IEC 61558-2-15
IEC60364-7-710
Kindly Fill out the Form below and tell us more about your Requirements,
We would like to provide Suitable Solution for You.
or Send us Email directly, [email protected]
