Data Center Power Monitoring Solution

The power monitoring system realizes the functions of monitoring, measuring, recording, and alarming the medium and low voltage power distribution system of the data center, UPS, battery pack, ATS/STS, precision power distribution cabinet, power supply branch current, PDU cabinet power supply and other important equipment.

Real-time grasp of the operating status of the power supply system and possible hidden dangers, quickly eliminate faults and improve the reliability of data center power supply.


What's the Difficulty of Data Center Power Monitoring?

  • Data Delay
  • Local Control
  • Manual Statistics


What's the Highlight of Data Center Power Monitoring Solution?

  1. Real-time Monitoring
  2. Remote Control
  3. System Analysis


What's the Configuration for Data Center Power Monitoring?

The following is a typical electrical single-line diagram of a large data center. In order to improve the power supply reliability of the data center,

It adopts 2-way 10kV mains power supply and configures 10 sets of 10kV diesel generators as backup power supply.

A 500kVA UPS is configured on the 0.4kV side to supply power for precision air conditioners and precision power distribution cabinets (intelligent small bus bars).


What's the Solution for Data Center Power Monitoring Solution?

The system adopts a distributed structure, microcomputer protection device, multi-function instrument, transformer temperature controller, DC screen, diesel generator control screen and other equipment

Connect to the intelligent gateway through RS485 bus or Ethernet,

After protocol conversion and data processing, it is uploaded to the power monitoring system.

Realize telemetry, remote signaling, remote control, abnormal alarm and other functions.


What's the Function of Data Center Power Monitoring Solution?

Real-time monitoring

The system has a friendly man-machine interface, visually displays the operating status of the distribution line in the form of a distribution diagram, monitors the voltage, current, power, power factor, electric energy and other electrical parameters of each circuit in real time, and dynamically monitors the circuit breakers, On-off status of isolating switch, ground knife, etc., diesel generator status, diesel liquid level, UPS status, battery information, etc., as well as signals related to faults and alarms.

UPS monitoring

The system collects UPS input, output and bypass three-phase voltage, current, active power, power factor frequency, and simultaneously monitors data such as UPS temperature, battery voltage, and remaining time under current load. When an abnormality is detected, an alarm signal will be issued in time. Alarm signals can also be graded according to urgency.

Precision distribution cabinet monitoring

The system can display the electrical parameters of the incoming line and feeder circuit in the precision power distribution cabinet, including current, voltage, power, energy and switch status, and can set and classify the data. The data is obtained from the measurement module of the precision power distribution cabinet.

Electric energy statistical report

The power monitoring system supports the integrity of the measurement system with a rich report body. The system has the function of timing meter reading and summary statistics. Users can freely query the power consumption of each power distribution node in any time period since the system was in normal operation, that is, the statistical analysis report of the power consumption of the incoming line of the node and the power consumption of each branch circuit.

Network topology diagram

The power monitoring system supports real-time monitoring of the communication status of each device connected to the system, and can completely display the network structure of the entire system; it can diagnose the communication status of the device online, and automatically display the faulty device or component and its fault location on the interface when a network abnormality occurs .

User rights management

In order to ensure the safe and stable operation of the system, the power monitoring system has set up the user authority management function. Unauthorized operations (such as remote operations, database modifications, etc.) can be prevented through user rights management. The login names, passwords and operation rights of users at different levels can be defined to provide reliable security guarantees for system operation, maintenance and management.

Request Information & Quotation

Kindly Fill out the Form below and tell us more about your Requirements,
We would like to provide Suitable Solution for You.
or Send us Email directly, [email protected]

If you have more detailed requirements, Please go to the relevant product page to submit the form.